Bio Safety Cabinets, Class II

EFLM CLASS SERIES ΙΙ Microbiological Safety Cabinets

TECHNICIAL SPECIFICATIONS

Hepa Filters

The large amount of particles less than 0.3 micron HEPA filters. The minimum efficiency level is 99.999%. (According to the DOP test) decontamination factor (F) is the minimum 100000

Working Cabinet

Epoxy powder coated 2mm cold rolled steel DKP lower cabinet may be of the mobile site or a metal cap fixed system ended tube within the cabinet gas and water outlet nozzles, the heavy and light gas setting panel, cab flouresant light, UV light, the hood portion of the air flow the system according physique

Working Floor

AISI 304 stainless steel perforated disassembled antacid compact laminate

Pre-filter

Synthetic fiber-based filter is a HEPA filter by filtering airborne particles that extends the life of the HEPA filter.

Fan

Standard EN 60034-1 Protection class IP44 steel body, single inlet centrifugal type blower is. Impeller and motor is balanced statically. Laminar air velocity of 0.25 to 0.55 m / sec.

Lighting

Low power high-intensity 800 Lux (Flouresant Lamp / UV Lamp

Measures Study

Optional

Paint

Metal parts after cleaning with a specific solvent coated with epoxy powder paint is sintered at 200 C ̊.

Noise Level

55 dBA

standard Accessories

Stanchion stand / UV lamp / Speed ​​adjustable dimmer switch / filter life counter

Options

Complete stainless steel inner reservoir / gas and water valve / sink / cabinet

Installed Power

220 V / 50 Hz

Air Flow Control

Manual Speed ​​Control

Other Specifications

User requests to the appropriate device and is produced under laboratory conditions.